Now available: adjustable, padded Velcro divider trays for the 830 carry-on rolling case. Ideal to better store and transport your photography and electronic equipment.
Seahorse 56 Micro Case New Component
The micro case gets a new seal! The 56 is now available with an option perimeter seal in lieu of the liner. This will enable you to utilize the four bosses as the base of the case for multiple applications and uses.
Please contact your local distributor for more information.
Seahorse 56 Micro Case Video
Check out our latest video highlighting all the awesome features packed into this small but mighty case!
Seahorse 56 Micro Case features:
- Keyed locking twist latch
- Shock absorbent padded liner
- Removable mesh lid web for extra padding and storage
- Automatic pressure purge vent
- Rust proof hinges
- Molded in hole for optional carabiner
- 2″ strap attachment points on each end
- Watertight, crush resistant, dust proof
- Will fit a variety of devices including but not limited to: iPhone 7 Plus, Samsung Galaxy S7 Edge, Samsung Galaxy Note
- Internal Dimensions: 8.4″ x 4.4″ x 2.3″
Seahorse 630 Protective Case Updated User Print
We have updated the user print for the 630 case to include the Hinged Panel System in both metal and standard lock panel options:
It can also be found under “Documents” tab on the product page here.
Seahorse Welcomes New Case Size: 230
Seahorse proudly introduces the newest size to the case family: the 230. Created to provide more options to to protect smaller, compact valuables, this case has interior dimensions of 10.6 x 6.1 x 4 inches. Ideal to store anything from electronics to firearms.
The 230 features:
- Automatic Pressure Purge System
- Ergonomic handle
- Twist lock latches
- Padlock holes
- Optional Pick and Pluck foam
- O-Ring creating a watertight seal
- Waterproof, Dustproof, Crush Resistant
- Lifetime Guarantee
For more information and where to purchase, please visit the 230 on our website.
Updated Latches
We are constantly improving our cases and recently, some of our cases have received updated latches. We have improved the look and feel of the latches for the following cases:
540, 710, 720, and 920
These latches have been redesigned to be larger with a locking knob. The vent cover is larger, easier to see and added ribbing to the latch as well.
Please keep in mind these latches will not fit on any older cases. They are made specifically for the newest case revisions.
New Revision for the SE300
The SE300 is falling in line and getting the same updates as the SE120. The updated handle has a ergonomic grip and also makes a clicking sound when it lays flat, ensuring that the handle is securely locked into place.
The new front lip design improves the rigidity and appearance of the case, while the added padlock mount allows for an extra security option.
Twist Lock
Project : Quick Twist Lock attachment
Designer : D. Davis
Purpose : To securely attach and or detach a case to an surface quickly.
Supplies :
SE56 Micro Case
3M VHB Double Sided Tape (McMaster Carr #7170A39)
Steel Compression Spring x4 (McMaster Carr #9657K274)
#6 Hi-Low Screws x4 (McMaster Carr #90385A146)
#8 Flat Head Screws x4 – OPTIONAL
3D Printed Base (click for STL file) or order from (Shapeways)
3D Printed Lock (click for STL file) or order from (Shapeways)
3D Printed Plunger (click for STL file) or order from (Shapeways)
3D Printed Plunger Cover (click for STL file) or order from (Shapeways)
Steps:
1. Place Base upside down.
2. Install Plunger into Base.
3. Fit plunger into Base.
4. Place 4 Compression Springs into Base/Plunger Assembly.
5. Screw Plunger Cover onto Base/Plunger Assembly with 4 Hi-Low screws.
6. Apply VHB Tape to Base and Lock parts as shown.
7. Clean surface of SE56 and surface that the base will be applied to with rubbing alcohol.
8. Place the VHB strips on the Lock surface in between the two grooves as shown.
9. Carefully place the Lock onto the bottom of the SE56.
10. (a) Mark the surface where the Base will be installed and drill for screws or use self tapping screws to attach the Base to your surface
(b) Alternatively you may use VHB to attach the Base to your surface. Install VHB onto Base and carefully place the Base on the item you want to install it onto.
Helpful Hints:
– VHB is incredibly strong but it may require some time to “build” adhesion.
– The SE56 is made from Poly-carbonate so a glue or adhesive appropriate for Poly-carbonate may work well. Most other Seahorse Cases are made from Polypropylene and do not accept glue or adhesive well, in this case use the screw attachment points provided on the Base.
Please show us how you use the twist lock for your application!
SE120 Updated Features
The updated handle has a ergonomic grip and also makes a clicking sound when it lays flat, ensuring that the handle is securely locked into place.
The new front lip design improves the rigidity and appearance of the case, while the added padlock mount allows for an extra security option.
New Changes to the SE540
The SE540 recently underwent a facelift and some other changes to improve the case overall. The revisions include new safety latches, added ribs at the perimeter, lip change, and a smaller label area.
If you still liked the old version of the SE540 case, don’t worry! We still have limited stock available in orange, yellow and forest camo. Contact your distributor today to get your hands on the old version before they’re gone. This newer, improved revision is available NOW in all colors.